[c-nsp] Etherchannel & port-channel

[Mike Sawicki]

On Tue, Jul 27, 2004 at 11:24:47AM -0700, Richard J. Sears wrote:
> I have a 6509 running dual SUP720 engines and need to hand my customer a
> 2 gig etherchannel connection. I am running IOS only (no Cat OS). However
> after configuring the ports, I am seeing something strange in the sh
> int:
> 
> I show both gig ports in the members section, but I show only 1000Mb/s
> as the total etherchannel size:
> 
> Does anyone know if this is a bug in the IOS (maybe it will only show a
> total of 1000Mb/s) or is there another problem..?
> 
> Thanks
> 
> AR01#sh int port-channel 101
> Port-channel101 is up, line protocol is up (connected)
>   Hardware is EtherChannel, address is 00d0.01a6.b000 (bia 00d0.01a6.b000)
>   Description: XS EtherChannel Interface (CF1.CGX) [21645]
>   Internet address is 202.201.205.101/30
>   MTU 1500 bytes, BW 2000000 Kbit, DLY 10 usec, 
>      reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
>   Full-duplex, 1000Mb/s
>   input flow-control is off, output flow-control is unsupported 
>   Members in this channel: Gi7/1 Gi8/1     
>   ARP type: ARPA, ARP Timeout 04:00:00
>   Last input 00:00:00, output 00:01:14, output hang never
>   Last clearing of "show interface" counters never
>   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
>   Queueing strategy: fifo
> --------------SNIP------------------
> 

Description: XS EtherChannel Interface (CF1.CGX) [21645]
Internet address is 202.201.205.101/30
MTU 1500 bytes, BW 2000000 Kbit, DLY 10 usec,
		   ^^^^^^^
reliability 255/255, txload 1/255, rxload 1/255                   

Looks OK to me..
-- 
Mike Sawicki (fifi at HAX.ORG)