[c-nsp] Sup 720 Console

Voll, Scott Scott.Voll at wesd.org
Tue Jul 27 17:51:50 EDT 2004


I didn't see the below email.  Forget the whole redundant line.

-----Original Message-----
From: Voll, Scott 
Sent: Tuesday, July 27, 2004 2:49 PM
To: 'info at beprojects.com'; Cisco Nsp
Subject: RE: [c-nsp] Sup 720 Console

You must type 

Switchport
Switchport access vlan 100

They want you to make it a switchport before you assign it a Vlan.

Is the sup bad or is it the redundant one?  I don't think the redundant
sup's console port works.

Scott

-----Original Message-----
From: info at beprojects.com [mailto:info at beprojects.com] 
Sent: Tuesday, July 27, 2004 2:44 PM
To: Cisco Nsp
Subject: Re: [c-nsp] Sup 720 Console

I mucked around with it some more and I think it is a bad sup.  The
other
one worked fine.  One additional question that I just ran into.  How do
you
make the switch ports act like switch ports?  Everytime I try something
like
"switch access vlan 100", it says it isn't a switching port.  On a
3500-type, you just say "switch mode access" to turn off L3, but that
doesn't appear to work here.


----- Original Message ----- 
From: "Richard J. Sears" <rsears at adnc.com>
To: <info at beprojects.com>
Sent: Tuesday, July 27, 2004 4:25 PM
Subject: Re: [c-nsp] Sup 720 Console


> We have two 6509s with dual 720's and we have no problems with the
> console ports on either switch for both engines.
>
> We also have 10/100 line cards populating the top two slots in both
> switches.
>
>
> On Tue, 27 Jul 2004 15:18:05 -0500
> <info at beprojects.com> wrote:
>
> > Is there something strange with the Sup 720 console?  I've just
plugged
into
> > the first one I've ever used and I see all of the logging stuff, but
when I
> > hit return, I get nothing.  I've verified that everything works on a
> > different router and switch and when I plug it into the Sup 720,
once it
> > boots up, I can't break in.  Any ideas?  (it's not speed, parity,
flow
> > control, etc as it works fine on other devices)
> >
> > On a side question, since the 720 uses slots 5/6, can you then use
slots
1/2
> > for line cards?  I always thought they were reserved for Sups.
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> ******************************************
> Richard J. Sears
> Vice President
> American Digital Network
> ----------------------------------------------------
> rsears at adnc.com
> http://www.adnc.com
> ----------------------------------------------------
> 858.576.4272 - Phone
> 858.427.2401 - Fax
> ----------------------------------------------------
>
> I fly because it releases my mind
> from the tyranny of petty things . .
>
>
> "Work like you don't need the money, love like you've
> never been hurt and dance like you do when nobody's
> watching."
>
>

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list