[c-nsp] Re: 6500 under DDoS
Tim Stevenson
tstevens at cisco.com
Wed Jul 28 00:22:06 EDT 2004
To clarify, PBR is hardware switched as long as you only use match ip
address, set ip next-hop, set ip default next-hop*, and set interface
null0* in your PBR route map.
* = software release dependent.
This assuming the PBR ACL fits in the ACL TCAM and you have adequate PBR
adjacencies available. ;)
Tim
At 03:01 PM 7/27/2004, cisco-nsp-request at puck.nether.net mused:
>- weird features turned on (policy based routing, NBAR)
Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.
More information about the cisco-nsp
mailing list