[nsp] I need ideas on how to simulate a 200ms round-trip latency and bandwidth limitation.

[Brian Vowell]

I have some routers at the other end of an 800ms link.  What kind of a 
test are you going to run?


--b

Goldberg Alain (IT) wrote:

> 
>Hi all,
>
>I need to do some software tests between our main site and equipment
>that will be collocated some 200ms from here.
>I'd like to simulate the latency and some bandwidth limitation - let say
>256Kbps.
>
>The testing equipment I have on-hands is:
>A couple of 250x routers, ( I tough to put them with serials back to
>back but can't find the Female V35 cable and it will not create the
>desired latency anyway). 
>A 2600 router with a couple of ethernets and one serial port.
>An old 4500 router (enterprises image) . 
>
>A few 2924, 2950, 3550 switches
>
>A few 6500's  (enterprises image) that are in production - so I can't
>play much with them - let say I can make changes on a specific interface
>- but not global changes.
> It has only ethernet ports.
>
>A VPN-3006, and a couple of VPN's 3002.
>
>A few AP-350's access points.
>
>Please guys ... Be creative.
>
>Thanks.
>
>________________________________________________________________________
>________________________________________________________________________
>_________________
>Alain Goldberg - Network manager - CCDA/CCNA AGG-RIPE - Tower
>Semiconductors LTD.    Tel : 972-4-6506003 Fax : 972-4-6547788 Cell:
>972-64-209662
>________________________________________________________________________
>________________________________________________________________________
>_________________
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>