[nsp] Three subinterfaces using OC3 PoS on 7206 with rate-limiting???

[Robert E. Seastrom]

sthaug at nethelp.no writes:

> > Can anyone tell me if it is possible to set up three
> > logical subinterfaces on an OC3 PoS port on 7206, each
> > with different rate limiting parameters? I have
> > scoured the net and can find no specific information
> > on this. 
> 
> Sure. Frame Relay is your friend. Configure FR encapsulation and
> either turn off keepalive or configure FR switching at one end.
> Then you can define subinterfaces to your heart's content.

Actually, (if my recollection is correct), "frame-relay switching" is
only necessary if you want to actually switch a dlci out another port.
For the simple back-to-back configuration described above, setting
"frame-relay intf-type dce" on one end should be sufficient.

Additional information on back-to-back frame with LMI turned off:
http://www.cisco.com/warp/public/125/frbacktoback.html

Additional information for having one end pretend to be a switch:
http://www.cisco.com/warp/public/125/frbacktoback_hybrid.html

                                        ---Rob