[nsp] OT: Setting MTU of Riverstone RS-3000 T-3 interface...

[Chris Hale]

Yes, but there is no command to do that.  I can find a command that changes
the MTU of the IP interface on the RS-3000, but I think you'd need to change
the physical port settings, correct?

Chris

----------------------------------------------
Chris Hale
Peak Networks, Inc.
http://www.peaknetworks.com
800-PEAK-987
chris at peaknetworks.com
Motorola ACSP, Alvarion AIR, Certified Orthogon, Redline, Cisco, Terabeam
Partners.

 
 


-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no] 
Sent: Wednesday, June 02, 2004 9:41 AM
To: chris at peaknetworks.com
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] OT: Setting MTU of Riverstone RS-3000 T-3 interface...

> Sorry for the off-vendor post, but I'm trying to connect a Riverstone
> RS-3000 to a Cisco 12008 GSR via a clear-channel DS-3 loop.  The RS-3000
> needs to have the MTU set to 4470.  Does anyone know how to do this?  I
> can't find it anywhere on the configuration options of the RS-3000, and
the
> MIBs of the RS-3000 show a MTU of 1500 for the DS-3 interface, the FR
> interface, and the IP interface.

Are you maybe looking for "port set t3.1.1 mtu 4470" or something 
similar?

Disclaimer: Definitely not a Riverstone expert.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no