[nsp] Filtering special static routes from distributing into ospf

[Zaheer Aziz]

At 05:23 PM 6/3/2004 +0800, Joe Shen wrote:
>Hi,

Hi Joe,

When using redistribute static command, use route-map and in route-map
use access-list (match ip address command).

Other approach is to assign tags for static routes

ip route x.x.x.x mask tag A
and in route-map match on just the tags which has local significance.

CCO should have bunch of examples.

Hope this helps
Zaheer



>Is there sample configuration for filtering special static routes from
>being distributing into ospf ?
>e.g.,  we have set up OSPF with two areas and some static routes, and
>static route and static connection
>is distributed into ospf.
>
>now, we want to filter special static routes ( e.g. ip route 10.10.0.1
>255.255.255.255 192.168.1.34 ) from being
>distributed into OSPF.
>
>
>Thanks in advance.
>
>
>Joe Shen
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/