[nsp] Cisco Crashing

[Anson Rinesmith]

I have a 7206, with a 2 port Fast Ethernet Card, and an 8 port T1 card.

I have my backhaul going out port F0/0, and I have T1's hooked up to the 8
port card.

The problem is, I am trying to add a Paradyne DSLAM to the F0/1 port.

Within minutes of plugging in the Ethernet cable, my router goes into cyclic
rebooting.

I get this in my crashinfo

CMD: 'no crypto map NiStTeSt1' 11:39:42 UTC Wed May 26 2004

 

CMD: 'no crypto map NiStTeSt1' 11:39:42 UTC Wed May 26 2004

 

*May 26 11:39:43.316: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software 

IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.3(3), RELEASE SOFTWARE
(fc2)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Mon 18-Aug-03 21:11 by dchih

*May 26 11:39:43.320: %SNMP-5-COLDSTART: SNMP agent on host nexus5 is
undergoing a cold start

*May 26 11:39:43.916: %SYS-6-BOOTTIME: Time taken to reboot after reload =
157 seconds

*May 26 11:39:44.184: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed
state to up

*May 26 11:39:44.184: %LINK-3-UPDOWN: Interface FastEthernet1/1, changed
state to up

*May 26 11:39:44.204: %SSH-5-ENABLED: SSH 1.5 has been enabled

*May 26 11:39:46.184: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet1/0, changed state to up

*May 26 11:39:47.076: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet1/1, changed state to up

%ERR-1-SERR: PCI bus system/parity error

 

I've reseated all the cards, but it still happens. Where do I start?

 

Anson Rinesmith