[nsp] Aggregating DS3s

[Adam Debus]

I think the biggest problem you might encounter is that one of your
connections is ATM while the other is HDLC. I personally don't know of any
cards that would handle both ATM and non-ATM connections at the same time.

---
Adam Debus
Network Engineer, ReachONE Internet
adam at reachone.com
----- Original Message ----- 
From: "Barry Kiesz" <barry at nvc.net>
To: <cisco-nsp at puck.nether.net>
Sent: Friday, June 11, 2004 09:15
Subject: [nsp] Aggregating DS3s


> We're in the process of hooking up another DS3 customer (Fractional) and
> my boss has asked me to research the possibility of aggregating our DS3s
> into an OC-3 interface.
>
> This is what we have:
>
> OC-3 ATM connection to our Passport 15k carrying about 11Mb from one
> customer
> A new DS-3 (standard, not ATM) to another customer with a 6Mb
> commitment.
>
> We were wondering is it's possible to bring both of these connection
> into the router through one interface in neither one of the customers
> will be using the port capacity.  Does Cisco have a card for the 7206
> that would break out STS's on an OC-3 essentially bringing multiple DS3
> into one interface
>
>
> Barry
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>