[nsp] Aggregating DS3s
Adam Debus
adam-lists at reachone.com
Fri Jun 11 13:41:15 EDT 2004
Yeah, I didn't think it did. Cisco's always seperated the ability to handle
ATM from the ability to do anything else.
---
Adam Debus
Network Engineer, ReachONE Internet
adam at reachone.com
----- Original Message -----
From: "Hudson Delbert J Contr 61 CS/SCBN" <Delbert.Hudson at LOSANGELES.AF.MIL>
To: "'Adam Debus'" <adam-lists at reachone.com>; <cisco-nsp at puck.nether.net>
Sent: Friday, June 11, 2004 10:34
Subject: RE: [nsp] Aggregating DS3s
> Adam,
>
> i hesitate to reply w/a blanket no as it might exist...but
> i'm going to do it anyway...
>
> the answer is no....
>
>
> ####################################
> # delbert.hudson at losangeles.af.mil #
> # 61cs/scbn, 3-0182 #
> ####################################
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Adam Debus
> Sent: Friday, June 11, 2004 10:16 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] Aggregating DS3s
>
>
> I think the biggest problem you might encounter is that one of your
> connections is ATM while the other is HDLC. I personally don't know of any
> cards that would handle both ATM and non-ATM connections at the same time.
>
> ---
> Adam Debus
> Network Engineer, ReachONE Internet
> adam at reachone.com
> ----- Original Message -----
> From: "Barry Kiesz" <barry at nvc.net>
> To: <cisco-nsp at puck.nether.net>
> Sent: Friday, June 11, 2004 09:15
> Subject: [nsp] Aggregating DS3s
>
>
> > We're in the process of hooking up another DS3 customer (Fractional) and
> > my boss has asked me to research the possibility of aggregating our DS3s
> > into an OC-3 interface.
> >
> > This is what we have:
> >
> > OC-3 ATM connection to our Passport 15k carrying about 11Mb from one
> > customer
> > A new DS-3 (standard, not ATM) to another customer with a 6Mb
> > commitment.
> >
> > We were wondering is it's possible to bring both of these connection
> > into the router through one interface in neither one of the customers
> > will be using the port capacity. Does Cisco have a card for the 7206
> > that would break out STS's on an OC-3 essentially bringing multiple DS3
> > into one interface
> >
> >
> > Barry
> >
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list