[nsp] Monitor temperature on Cisco 2950 switch

[Siraj 'Sid' Rakhada]

--On Wednesday, June 16, 2004 4:35 pm +0100 "Pal, Laszlo" 
<laszlo.pal at eds.com> wrote:

> Is there any in Catalyst 6500 switches?

Yes. Do the 'show env temp' thing, and you should get temperature readouts 
in the CLI for all the modules.

For graphing via SNMP, I think you should find this link handy:
<http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094b9e.shtml>

I'm assuming here you mean temperature monitoring via SNMP, it's not 
particularly clear from your email.

Sid