[nsp] Gig-copper mgt port on PRP-2

[Eric Osborne]

On Thu, 17 Jun 2004 14:35:54 -0600 (MDT), Pete Kruckenberg  
<pete at kruckenberg.com> wrote:

> Anyone tried bringing up the Gig-copper port on the PRP-2?
>
> According to
> http://www.cisco.com/en/US/products/hw/routers/ps167/products_data_sheet0900aecd800f414a.html
> it will be enabled in 12(0)30S.
>
> The latest IOS in the 12.0S train is 12(0)28S. It doesn't
> support the Gig-copper port (I even tried installing it just
> to be sure).
>
> Is 12(0)30S available in any form (beta?) yet or is this a
> feature to-be-included? Anything else I can do in the
> mean-time to use this port? Any word on when 12(0)30S will
> be available?

As of now, 12.0(30)S should hit CCO end of November/start of December.   
Contact me off-list and I'll try to put you in touch with the right  
people; I don't know if there's EFT code available yet, but we can try.





eric

>
> Pete.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/