[nsp] no BGP support for 1721 in 12.3?

[Mark Tinka]

On Friday 18 June 2004 22:39, Brian Vowell wrote:
> We are running 12.3(9) on all our 1721's and 1751's and all are running
> BGP.  You need a Plus image to run BGP.  Advanced Security doesn't
> appear to have it.

Same goes for 1600R, need IP PLUS to get BGP.

Mark.

>
>
> --b
>
> Thomas Kernen wrote:
> >According to CCO Software Advisor, the 12.3 train for the Cisco 1721
> >should support BGP. Unfortunally all I get is the following:
> >
> >router(config)#router bgp 65000
> >Protocol not in this image
> >router(config)#
> >
> >Image is 12.3(9) Advanced Security (c1700-advsecurityk9-mz.123-9.bin)
> >
> >Has anyone else come across this issue?
> >
> >Thomas
> >
> >PS: Not running the router with full routes (of course).. but need BGP
> >support for various reasons.
> >
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/