[nsp] Newbie question :)

[MacKinnon, Ian]

I can think of 2 options
Sh run | begin
Ie "show run | begin router ospf" will start at the ospf process config

And 
Sh run interface
If you just want to look at an individual interface

These may depend on IOS and hardware

> -----Original Message-----
> From: Pal, Laszlo [mailto:laszlo.pal at eds.com]
> Sent: 29 June 2004 09:29
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Newbie question :)
> 
> Hi,
> 
> I have to manage several C6513 switches with tons of interfaces, so I have
> to scroll a lot of configs. Do you know any way to exclude interface
> configurations from the sh run output?
> 
> Thank you
> L:
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/