[nsp] PIX Static/ACL [SOLVED]

[Tony Mucker]

Got it, the clear xlate cleared it up for me.

Gotta write that down...

Richard Danielli - eSubnet wrote:

>Tony,
>
>I assume you have added the object and the translation.
>
>2 questions
>
>1)
>can you make it work with a server in the 172.16.0.x net
>
>2)
>have you added a static rout to the pix as to where to find the 172.18.0.x
>net ?
>
>-rd-
>
>--
>Richard Danielli
>Founder/President
>eSubnet Enterprises Inc.
>TORONTO, ON
>Canada
>(416) 203-5253
>c: (416) 525-6148
>http://www.eSubnet.com
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>This E-mail message is confidential, intended only for the named
>recipient(s) above and may contain information that is privileged,
>confidential or exempt from disclosure under applicable law.
>If you receive it in error, please let us know by reply E-mail,
>delete it from your system and destroy any copies.
>Thank you.
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
>  
>
>>-----Original Message-----
>>From: cisco-nsp-bounces at puck.nether.net
>>[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Tony Mucker
>>Sent: Wednesday, June 30, 2004 8:42 PM
>>To: cisco-nsp at puck.nether.net
>>Subject: [nsp] PIX Static/ACL
>>
>>
>>Quick question,
>>
>>My PIX sits between my public side and my private side (172.16.0.X).
>>There's also a Layer 3 Router on my private side (172.16.0.X), that's
>>then connected to my lab (172.18.0.X), as well as a few other places.
>>What do I need to do to have a machine in the lab be visible on port 80
>>from the outside world?  I've already tried the static (high,low) low
>>high with an ACL, but that doesn't seem to work.
>>
>>It used to work fine with the Checkpoint I had, but that got replaced in
>>favor of the PIX last weekend...
>>
>>
>>Thanks
>>Tony
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>    
>>
>
>  
>