[nsp] autonomous-system xxxx

[Harold Ritter]

Kashif,

This command is only used for EGP and refers to the local autonomous system 
number. It is not related to BGP at all.

Hope this helps,

At 10:14 AM 3/1/2004 -0600, Kashif.Khawaja at broadwing.com wrote:
>Hi All:
>
>Anybody know what purpose the command
>
>Autonomous-system xxxx
>
>serves?
>
>It appears independently under global config (not under the BGP section). 
>I cannot find
>any references to it on CCO in documentation for 12.0 12.2 or 12.3.
>
>Any pointers would be appreciated. Thanks!
>
>-Kashif.
>  +++The information transmitted is intended only for the person or entity 
> to which it is
>addressed and may contain confidential and/or privileged material.  Any 
>review,
>retransmission, dissemination or other use of, or taking of any action in 
>reliance upon,
>this information by persons or entities other than the intended recipient 
>is prohibited.
>If you received this in error, please contact the sender and destroy any 
>copies of this
>document.+++
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

Harold Ritter, CCIE 4168 (R&S / SP)
Advanced Services - Canada
Cisco Systems
1414 Massachusetts Avenue
Boxborough, MA 01719 USA
Phone: 978 936 1431
Cisco Systems- "Empowering the Internet Generation."