[nsp] pix & ospf

[Mati Gil]

By default, OSPF routing is disabled on the firewall interfaces. To enable
it use command "routing interface inside" (after configuring OSPF global
parameters, "router ospf 1"). Then, if needed, you can set
interface-specific configuration through the routing interface subcommands.

Mati
-----Mensaje original-----
De: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]En nombre de Tomas Daniska
Enviado el: martes, 02 de marzo de 2004 10:15
Para: cisco-nsp at puck.nether.net
Asunto: [nsp] pix & ospf



hey all,

[maybe o/t but no cisco-pix list available...]

it seems to me that pix does not like ospf-learned routes from the
inside side


does anyone know if there's a trick to make the box like the routes,
other than adding similar static routes to inside?


thanks

--

Tomas Daniska
systems engineer
Tronet Computer Networks
Plynarenska 5, 829 75 Bratislava, Slovakia
tel: +421 2 58224111, fax: +421 2 58224199

A transistor protected by a fast-acting fuse will protect the fuse by
blowing first.



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/