[nsp] GSR 12008 with AC + DC PS

[Dave O'Shea]

One of my engineers did that once to a lab unit. It
didn't blow up, and seemed to work fine until I had
him disconnect it.

I was concerned about the possibility of an open
circuit, since I don't know what the disconnect
mechanism in the AC supplies is like, or how it can
interact with a DC supply, and this was in an
office-type lab with a limited-capacity rectifier
supplying DC for test equipment.


--- Pete Kruckenberg <pete at kruckenberg.com> wrote:
> Stupid question. Is it possible to put one AC
> (120VAC) and 
> one DC (-48V) power supply into the same GSR 12008
> chassis 
> for redundancy?
> 
> Pete.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
http://puck.nether.net/pipermail/cisco-nsp/