[nsp] Cisco 7600 MLS Netflow table

[Ian Cox]

At 05:02 PM 3/8/2004 -0700, Clinton Work wrote:
>Does anyone know how to decode the src i/f number into an actual interface?
>I walked
>the snmp ifindex table and it only has ifIndex values 1-101.

They are not ifindexes being displayed by "sh mls netflow ip", they are 
vlan numbers. The ifindexes are filled in based upon this value when the 
flow is exported to the collector. To see what vlan is assigned to an 
interface look at "sh vlan internal usage"


Ian


>Sup2/MSFC2 with Native IOS 12.1(13)E9.
>
>router#show mls netflow ip
>Displaying Netflow entries in Supervisor Earl
>DstIP           SrcIP           Prot:SrcPort:DstPort  Src i/f:AdjPtr
>--------------------------------------------------------------------
>Pkts         Bytes       Age   LastSeen  Attributes
>---------------------------------------------------
>x.x.x.x     y.y.y.y     tcp :3719   :3127     202 : 0
>1            48          1     16:57:29   L3 - Dynamic
>x.x.x.x    y.y.y.y      tcp :58351  :6881     201 : 0
>3            120         0     16:57:30   L3 - Dynamic
>x.x.x.x    y.y.y.y     udp :dns    :1092     1016: 0
>
>....
>
>
>
>! Netflow config
>mls flow ip interface-full
>mls nde sender version 5
>mls nde interface
>mls sampling packet-based 128 4096
>interface x
>  mls netflow sampling
>
>Clinton.
>
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/