[nsp] OSM-2OC12-ATM-SI

[Ian Cox]

Is the image your using on the Supervisor have a "v" in the name? If it has 
not this will explain why it is not booting.


Ian

At 05:41 AM 3/10/2004 +0100, Wim De Houwer wrote:

>Hey *,
>
>I'm having a problem trying to get a "OSM-2OC12-ATM-SI" to work on a 
>native catalyst 6500 with msfc-2-pfc-2.
>
>We tried running ios 12.1(20)E2 which according to this document 
>http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp1178061
>
>should work.  When we enter the module into the chassis, the led goes 
>orange and after some time it says that the module failed to boot...
>
>Does anyone have this module in production somewhere ? On which ios ? Any 
>special things needed to get it to work ?
>
>Thanks,
>
>Best regards,
>
>Wim De Houwer
>
>Network Engineer
>Tiscali N.V./S.A.
>Rue Stassart 43 Stassartstraat
>1050 Bruxelles-Brussel
>Belgique - België
>Tel.: +32 (0) 2 403.35.00
>Fax.: +32 (0) 2 700.44.03
>Dir.: +32 (0) 2 400.36.60
>Email: wdehouwer at be.tiscali.com
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/