[nsp] 6509 Help - Please! :)

[Paul Stewart]

Hi Tim.. Thanks again..;)

nrtc-6509> (enable) sh vlan
VLAN Name                             Status    IfIndex Mod/Ports, Vlans
---- -------------------------------- --------- -------
------------------------
1    default                          active    6       4/1-48
2    Management_VLAN                  active    116     1/1-2
                                                        3/1-48

nrtc-6509> (enable) sh port 15/1
* = Configured MAC Address

Port  Name                 Status     Vlan       Duplex Speed       Type
----- -------------------- ---------- ---------- ------ -----------
------------
15/1                       connected  trunk        full        1000 Route
Switch

Port   Trap      IfIndex
-----  --------  -------
15/1   disabled  107

Port  Status      ErrDisable Reason    Port ErrDisableTimeout  Action on
Timeout
----  ----------  -------------------  ----------------------
-----------------
15/1  connected                     -  Enable                  No Change

Port  Align-Err  FCS-Err    Xmit-Err   Rcv-Err    UnderSize
----- ---------- ---------- ---------- ---------- ---------
15/1           0          0          0          0         0

Port  Single-Col Multi-Coll Late-Coll  Excess-Col Carri-Sen Runts     Giants
----- ---------- ---------- ---------- ---------- --------- ---------
---------
15/1           0          0          0          0         0         0
-

On the msfc it is configured as (whole config post at bottom of my original
message):

interface Vlan2
 ip address xxx.xxx.100.1 255.255.255.0

nrtc-6509#show interfaces vlan 2
Vlan2 is down, line protocol is down

I don't see reference to vlan 2 being on 15/1 which I realize now is
probably an issue..:)

So I do this:

nrtc-6509> (enable) set vlan 2 15/1
VLAN  Mod/Ports
---- -----------------------
2     1/1-2
      3/1-48

No luck as you can see.. What am I doing wrong?

Thanks,
Paul

-----Original Message-----
From: Tim Stevenson [mailto:tstevens at cisco.com] 
Sent: Thursday, March 18, 2004 9:37 PM
To: Paul Stewart; cisco-nsp at puck.nether.net; cisco-nsp at puck.nether.net
Subject: RE: [nsp] 6509 Help - Please! :)


I already checked the config, it looks ok to me, assuming you moved sc0 to
vlan 2.

Make sure vlan 2 exists, is active in sh vlan, that sc0 is in vlan 2 & sc0
is active, and that you have a vlan2 int on the msfc and that it is no shut.

That should do it - if not, not sure what the issue might be. Is vlan 2
showing active & forwarding on 15/1?

What is the config of the msfc, didn't see it in the original post.

Tim

At 06:25 PM 3/18/2004, Paul Stewart quipped:
>And that is not happening... Did you see anything wrong with the 
>config?  I realize it's asking yourself and others for quite a bit of 
>"reading" but we're kinda stuck at this point and don't know where to 
>turn for assistance other than this list...:)
>
>Thanks again,
>
>Paul
>
>
>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net 
>[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tim Stevenson
>Sent: Thursday, March 18, 2004 9:17 PM
>To: cisco-nsp at puck.nether.net; cisco-nsp at puck.nether.net
>Subject: Re: [nsp] 6509 Help - Please! :)
>
>
>If sc0 is active in a given VLAN, autostate should bring the vlan 
>interface up, even w/no other ports are connected in that vlan.
>
>Tim
>
>At 05:43 PM 3/18/2004, cisco-nsp-request at puck.nether.net quipped:
>>Date: Thu, 18 Mar 2004 20:37:41 -0500
>>From: "Paul Stewart" <pauls at nexicom.net>
>>Subject: RE: [nsp] 6509 Help - Please! :)
>>To: "'John Wong'" <JohnWong at crimsonlogic.com>,
>>     <cisco-nsp at puck.nether.net>
>>Message-ID: <001001c40d52$c5280470$640aa8c0 at pstewart>
>>Content-Type: text/plain;     charset="us-ascii"
>>
>>Actually not yet... Didn't realize that.. Thought that the interface
>>would be up/down instead...
>>
>>We're going to bring this up live in the middle of the night (last try
>>for this week) and see what happens... Be presuming something in my 
>>config is wrong but if nobody sees anything wrong then maybe it's that 
>>simple.... I'll have to laugh if that's it... Been suffering 
>>brainfreeze now from look at this too long..;)
>>
>>Paul
>
>
>Tim Stevenson, tstevens at cisco.com
>Routing & Switching CCIE #5561
>Technical Marketing Engineer, Catalyst 6500
>Cisco Systems, http://www.cisco.com
>IP Phone: 408-526-6759
>********************************************************
>The contents of this message may be *Cisco Confidential*
>and are intended for the specified recipients only.
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/


Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.