[nsp] 6509 Help - Please! :)
Chris Griffin
cgriffin at ufl.edu
Thu Mar 18 22:43:47 EST 2004
That's your problem. 15/1 should be a wide open trunk to the MSFC,
native vlan 1.
set vlan 1 15/1
set trunk 15/1 1-1005,1025-4094
Paul Stewart wrote:
> nrtc-6509> (enable) sh trunk
> * - indicates vtp domain mismatch
> # - indicates dot1q-all-tagged enabled on the port
> $ - indicates non-default dot1q-ethertype value
> Port Mode Encapsulation Status Native vlan
> -------- ----------- ------------- ------------ -----------
> 15/1 nonegotiate isl trunking 2
>
> Port Vlans allowed on trunk
> --------
> ---------------------------------------------------------------------
> 15/1
>
> Port Vlans allowed and active in management domain
> --------
> ---------------------------------------------------------------------
> 15/1
>
> Port Vlans in spanning tree forwarding state and not pruned
> --------
> ---------------------------------------------------------------------
>
> -----Original Message-----
> From: Tim Stevenson [mailto:tstevens at cisco.com]
> Sent: Thursday, March 18, 2004 9:45 PM
> To: Paul Stewart; cisco-nsp at puck.nether.net; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] 6509 Help - Please! :)
>
>
> Vlan 2 should be added to 15/1 automatically. Try a sh trunk.
>
> Tim
>
> At 06:41 PM 3/18/2004, Paul Stewart quipped:
>
>>Hi Tim.. Thanks again..;)
>>
>>nrtc-6509> (enable) sh vlan
>>VLAN Name Status IfIndex Mod/Ports, Vlans
>>---- -------------------------------- --------- -------
>>------------------------
>>1 default active 6 4/1-48
>>2 Management_VLAN active 116 1/1-2
>> 3/1-48
>>
>>nrtc-6509> (enable) sh port 15/1
>>* = Configured MAC Address
>>
>>Port Name Status Vlan Duplex Speed Type
>>----- -------------------- ---------- ---------- ------ -----------
>>------------
>>15/1 connected trunk full 1000 Route
>>Switch
>>
>>Port Trap IfIndex
>>----- -------- -------
>>15/1 disabled 107
>>
>>Port Status ErrDisable Reason Port ErrDisableTimeout Action on
>>Timeout
>>---- ---------- ------------------- ----------------------
>>-----------------
>>15/1 connected - Enable No Change
>>
>>Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
>>----- ---------- ---------- ---------- ---------- ---------
>>15/1 0 0 0 0 0
>>
>>Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts
>
> Giants
>
>>----- ---------- ---------- ---------- ---------- --------- ---------
>>---------
>>15/1 0 0 0 0 0 0
>>-
>>
>>On the msfc it is configured as (whole config post at bottom of my
>>original
>>message):
>>
>>interface Vlan2
>>ip address xxx.xxx.100.1 255.255.255.0
>>
>>nrtc-6509#show interfaces vlan 2
>>Vlan2 is down, line protocol is down
>>
>>I don't see reference to vlan 2 being on 15/1 which I realize now is
>>probably an issue..:)
>>
>>So I do this:
>>
>>nrtc-6509> (enable) set vlan 2 15/1
>>VLAN Mod/Ports
>>---- -----------------------
>>2 1/1-2
>> 3/1-48
>>
>>No luck as you can see.. What am I doing wrong?
>>
>>Thanks,
>>Paul
>>
>>-----Original Message-----
>>From: Tim Stevenson [mailto:tstevens at cisco.com]
>>Sent: Thursday, March 18, 2004 9:37 PM
>>To: Paul Stewart; cisco-nsp at puck.nether.net; cisco-nsp at puck.nether.net
>>Subject: RE: [nsp] 6509 Help - Please! :)
>>
>>
>>I already checked the config, it looks ok to me, assuming you moved sc0
>>to vlan 2.
>>
>>Make sure vlan 2 exists, is active in sh vlan, that sc0 is in vlan 2 &
>>sc0 is active, and that you have a vlan2 int on the msfc and that it is
>>no shut.
>>
>>That should do it - if not, not sure what the issue might be. Is vlan 2
>>showing active & forwarding on 15/1?
>>
>>What is the config of the msfc, didn't see it in the original post.
>>
>>Tim
>>
>>At 06:25 PM 3/18/2004, Paul Stewart quipped:
>>
>>>And that is not happening... Did you see anything wrong with the
>>>config? I realize it's asking yourself and others for quite a bit of
>>>"reading" but we're kinda stuck at this point and don't know where to
>>>turn for assistance other than this list...:)
>>>
>>>Thanks again,
>>>
>>>Paul
>>>
>>>
>>>-----Original Message-----
>>>From: cisco-nsp-bounces at puck.nether.net
>>>[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tim Stevenson
>>>Sent: Thursday, March 18, 2004 9:17 PM
>>>To: cisco-nsp at puck.nether.net; cisco-nsp at puck.nether.net
>>>Subject: Re: [nsp] 6509 Help - Please! :)
>>>
>>>
>>>If sc0 is active in a given VLAN, autostate should bring the vlan
>>>interface up, even w/no other ports are connected in that vlan.
>>>
>>>Tim
>>>
>>>At 05:43 PM 3/18/2004, cisco-nsp-request at puck.nether.net quipped:
>>>
>>>>Date: Thu, 18 Mar 2004 20:37:41 -0500
>>>>From: "Paul Stewart" <pauls at nexicom.net>
>>>>Subject: RE: [nsp] 6509 Help - Please! :)
>>>>To: "'John Wong'" <JohnWong at crimsonlogic.com>,
>>>> <cisco-nsp at puck.nether.net>
>>>>Message-ID: <001001c40d52$c5280470$640aa8c0 at pstewart>
>>>>Content-Type: text/plain; charset="us-ascii"
>>>>
>>>>Actually not yet... Didn't realize that.. Thought that the interface
>>>>would be up/down instead...
>>>>
>>>>We're going to bring this up live in the middle of the night (last
>>>>try for this week) and see what happens... Be presuming something in
>>>>my config is wrong but if nobody sees anything wrong then maybe it's
>>>>that simple.... I'll have to laugh if that's it... Been suffering
>>>>brainfreeze now from look at this too long..;)
>>>>
>>>>Paul
>>>
>>>
>>>Tim Stevenson, tstevens at cisco.com
>>>Routing & Switching CCIE #5561
>>>Technical Marketing Engineer, Catalyst 6500
>>>Cisco Systems, http://www.cisco.com
>>>IP Phone: 408-526-6759
>>>********************************************************
>>>The contents of this message may be *Cisco Confidential*
>>>and are intended for the specified recipients only.
>>>
>>>_______________________________________________
>>>cisco-nsp mailing list cisco-nsp at puck.nether.net
>>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>Tim Stevenson, tstevens at cisco.com
>>Routing & Switching CCIE #5561
>>Technical Marketing Engineer, Catalyst 6500
>>Cisco Systems, http://www.cisco.com
>>IP Phone: 408-526-6759
>>********************************************************
>>The contents of this message may be *Cisco Confidential*
>>and are intended for the specified recipients only.
>
>
>
> Tim Stevenson, tstevens at cisco.com
> Routing & Switching CCIE #5561
> Technical Marketing Engineer, Catalyst 6500
> Cisco Systems, http://www.cisco.com
> IP Phone: 408-526-6759
> ********************************************************
> The contents of this message may be *Cisco Confidential*
> and are intended for the specified recipients only.
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Chris Griffin cgriffin at ufl.edu
Network Engineer - CCNP Phone: (352) 392-2061
Computing and Networking Services Fax: (352) 392-9440
University of Florida Gainesville, FL 32611
More information about the cisco-nsp
mailing list