[nsp] Replacing LS1010

[ibr94]

The E1 is actually for Motorolla Radio Trunking, and
as the E1 signaling is not supported by E1 port in
Cisco 4500/routers so I don't think AToM will work for
this ?




Thanks & Regards
Ibrahim
--- Brian Turnbow <b.turnbow at twt.it> wrote:
> AToM (anything over mpls) , I don't think the 4500
> will do this with e1
> though
> tdm over IP for example rad 2100 encapsulates e1
> time slots in ip packets,
> it doesn't care whats inside.
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf
> Of ibr94
> Sent: venerdi 19 marzo 2004 9.46
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Replacing LS1010
> 
> 
> Hi,
> 
> We have customer using LS1010 for data and E1 in his
> STM-1 connection. For the E1, they are using
> "smartzone type 2" signaling . They are willing to
> replace LS1010 with Cat 4500, but it will  be a
> problem to convert their E1 to IP as the signaling
> is
> not supported by Cisco. Is there anyway to bring the
> E1 converted to IP ?
> 
> Any help will be appreciated.
> 
> Regards
> Ibrahim
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - More reliable, more storage, less spam
> http://mail.yahoo.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
> 


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com