[nsp] 6509 Help - Please! :)

[Paul Stewart]

Thanks George (and everyone)...we'll try that approach... Cpu is not a worry
in this particulr setup (a lot of overkill thankfully)...


we had the same issue and are using the following 'workaround'

inbound:
we use a route-map that has an acl that matches ip any any and apply that to
all vlan interfaces. this forces all traffic to be process switched inbound
on that vlan. we then use car to limit it.

outbound:
we use traffic shaping to force traffic to be process switched, then use car
to limit


quite messy, but it works... (depending on traffic load, it may cause cpu
issues)