[nsp] Point to point ATM interfaces and OSPF

[Christopher J. Wolff]

Hello,

I've recently connected two ATM OC3 interfaces as point-to-point and have a
couple of questions.

1. Is the configuration method chosen the best performance option?
2. On this pair of interfaces and others I've had to add ip ospf network
point-to-point on one or both of the interfaces to get OSPF to pass packets.
Is this necessary?

Thank you very much for your assistance.

For example:

Router 1
interface ATM4/0
 description Rourter 1
 ip address 192.168.0.1 255.255.255.252
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip accounting access-violations
 ip nat outside
 ip route-cache flow
 no atm ilmi-keepalive
 pvc qsaal 0/5 qsaal
 !
 pvc ilmi 0/16 ilmi
 !
 pvc rsvp-ctl 0/51 
  inarp 5
  broadcast
 !
!

Router 2
interface ATM2/0
 description Router 2
 ip address 192.168.0.2 255.255.255.252
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip accounting access-violations
 ip route-cache flow
 atm clock INTERNAL
 no atm ilmi-keepalive
 pvc qsaal 0/5 qsaal
 !
 pvc ilmi 0/16 ilmi
 !
 pvc rsvp-ctl 0/51 
  inarp 5
  broadcast
  oam-pvc 0




Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com