[nsp] RPS (Redundant Power System ) Pinout on Catalyst 3550

[Daniska, Tomas]

it takes a screwdriver and a few minutes of your time to work out ;-]

do not have it handy, but i recall it was quite easy once i needed it as
there only is one voltage delivered via several parallel pins (4 or 5
wires for each of [+,GND])

--

deejay  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mourad BERKANE
> Sent: Tuesday, March 23, 2004 17:55
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] RPS (Redundant Power System ) Pinout on Catalyst 3550
> 
> Hi,
>  
> Is there anybody here on this list having the exact pinout of 
> the RPS port on a Catalyst 3550?
>  
> Thanks in advance,
> Mourad
> 
>