[nsp] WS-G5483 compatible with PA-GE?

[atticus at satanic.org]

> Anyone know?  Nothing in the docs - only makes reference to 1000-Base-CX
> but not to the specific copper GBICs...

Its not officially supported, but works fine in I/O-GE+E and PA-GE (have
tried getting this config blessed, but guess I need to lean on sales
channel more):

GigabitEthernet0/0 is up, line protocol is up
  Hardware is i82543 (Livengood), address is
  Internet address is
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full Duplex, 1000Mbps, Auto-negotiation, unknown media type
  output flow-control is off, input flow-control is off
  Full-duplex, 1000Mb/s, link type is auto, media type is unknown media type
  output flow-control is off, input flow-control is off

GigabitEthernet1/0 is up, line protocol is up
  Hardware is WISEMAN, address is
  Internet address is
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full Duplex, 1000Mbps, Auto-negotiation, unknown media type
  output flow-control is on, input flow-control is on
  Full-duplex, 1000Mb/s, link type is auto, media type is unknown media type
  output flow-control is on, input flow-control is on

This is on an NPE400 running 12.2(18)S1, though it was fine under
12.2(14)S as well (never tried others). Also tried it on 7304/NSE100
onboards without problems.