[nsp] Maximum 2 MBPs Serial Ports in the 2610

[Fast Track Technologies]

Vincent,

Our customer is looking for 6 x 2MBPs Serial Ports in the 2600 series.

Regards
Sunil

----- Original Message ----- 
From: "Vincent De Keyzer" <vincent at dekeyzer.net>
To: <cisco-nsp at puck.nether.net>
Sent: Thursday, March 25, 2004 3:40 AM
Subject: RE: [nsp] Maximum 2 MBPs Serial Ports in the 2610


> > > As I understand the 2610 does not support the NM-1FE2W / NM-2FE2W..
> > 
> > That's strange, I could swear the NM-1FE2W, NM-2FE2W, 
> > NM-1FE1R2W, and NM-2W are supported by the 2600 series. IIRC, 
> > the new NM-1FE2W-V2 and NM-2FE2W-V2 modules are also 
> > supported, if you have the minimum IOS/RAM required.
> >
> > The 2600 series should swallow the NM-xFE2W module - but your 
> > minimum IOS version would have to be 12.0(7)XK with 32MB DRAM 
> > minimum. Any IOS featureset will do.
> 
> That was a bad surprise to me too (and a subject for a previous post
> on this list): NM-xFE are not supported by 2600 - there seems to be 
> no way to have 3 FE ports on a 2600 (even XM).
> 
> Now, if that helps you, we are running 2621 with NM-2W and four
> VWIC-2MFT-E1, for a total of 8 E1 ports - I know that's not really
> what you are trying to achieve...
> 
> Vincent
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/