[nsp] dot1q subints on 6500/sup720

[Simon Lockhart]

On Tue Mar 30, 2004 at 01:04:40PM +0200, Tomas Daniska wrote:
> do you really require a dot1q trunk for each carrier? if not, switchport
> mode access is your friend :)

no, each carrier will be bringing in multiple vlans.
 
> or vlan translation could help you
> 
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/v
> lans.htm#wp1044990

That looks like it'd do the job, but... 

prt0.thdo(config-if)#switchport vlan mapping 101 4090
%VLAN mapping is supported on layer 2 switch port only.

...so I can't use it in combination with dot1q subints. Hmmm... Could have
been good otherwise ;-(

Simon