[nsp] debug ip packet - help!!

Wed May 26 07:59:00 EDT 2004

Bob,

A quick ping test in the lab with a 2500 running 12.0(5), and packet sniffer
had the following results

The packet sniffer showed a length of 114.
and
the debug ip packet out put was
00:09:35: IP: s=192.168.202.11 (local), d=192.168.202.1 (Ethernet0), len
100, sending
00:09:35: IP: s=192.168.202.1 (Ethernet0), d=192.168.202.11 (Ethernet0), len
100, rcvd 3

Hope that helps

-rd-

--
Richard Danielli
Founder/President
eSubnet Enterprises Inc.
TORONTO, ON
Canada
(416) 203-5253
c: (416) 525-6148
http://www.eSubnet.com

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Bob Arthurs
> Sent: Wednesday, May 26, 2004 7:03 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] debug ip packet - help!!
>
>
> hi guys
>
> i'd very much appreciate any help with a question - in the output of the
> 'debug ip packet detailed' command below, is the packet length shown (len
> 1552) the packet length iNCLUDING the IP packet header or
> EXCLUDING the IP
> packet header?
>
> r1#debug ip pack det
> IP packet debugging is on (detailed)
> r1#
> 01:04:59: IP: s=192.168.1.1 (Serial0/0), d=192.168.2.2 (Serial0/1),
> g=192.168.2.
> 2, len 1552, forward, proto=50
>
>
>
> thankyou very much in advance!
>