[nsp] CPA2511 router

[Even_Glemmestad at Dell.com]

There are several images in the "cpa25-in-l.111-24a.bin" format. I cannot seem to find anything newer than 11.1, though.

For CiscoPro upgrade instructions go to:
http://www.cisco.com/pcgi-bin/Software/Tablebuild/tablebuild.pl/rsl
But I presume you have allready read this?
You need to have the cpa2500-upgrade... file located in the Images directory, and then apply the firmware upgrade of the full IOS image to the router. The software will then recognize an upgrade is neccessary and do this for you.

// Even

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Linus Karl
Sent: 26. mai 2004 11:10
To: cisco-nsp at puck.nether.net
Subject: Re: [nsp] CPA2511 router


yes there is..  cpa25-up.bin    i loaded this to upgrace the firmware so 
i could use of any c2500xxxx but still getting same error

Kinczli Zoltán wrote:

>hello,
>
>  Wasn't there a small img, which sould be loaded onto your CPA device, to upgrade it
>from restricted CPA to a full featured router, so that it could run not only the cpa-xxx IOS,
>but a normal IOS?
>
>  Sorry, if my memory tricks me into beliving so...
>
>
>z.
>
>-----Original Message-----
>From: Linus Karl [mailto:linus at wenet.com.ph]
>Sent: Wednesday, May 26, 2004 11:38 AM
>To: cisco-nsp at puck.nether.net
>Subject: Re: [nsp] CPA2511 router
>
>
>Hi!
>
>I have tried every c2500-x-x-x- versions from 12.0  down to 11.2 but im 
>getting  Wrong system software for this hardware  upon boot up.  
>Documents i found says that the IOS binary starts with cpa25-x-x-x  but 
>cant also find such files from CCO.
>
>thanks,
>linus karl
>  
>


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/