[nsp] Help! AS5300 DialUp Problem[solved]

[Melvin C. Etheridge]

Thanks for the replies but the problem turned out to be associated with the
dialer in-band command.

When this command is used it sets dialer idle-timeout which has a default of
120 seconds.

I just deleted the dialer in-band command as it really is not needed for
async dialup.

Mel

----- Original Message ----- 
From: "Luan Nguyen" <luan.nguyen at mci.com>
To: "Melvin C. Etheridge" <mele at enia.net>
Sent: Wednesday, May 26, 2004 8:58 AM
Subject: Re: [nsp] Help! AS5300 DialUp Problem


> Hi,
> Maybe check the radius server for setting that could disconnect all users
> after 33 minutes.
>
> -luan
> ----- Original Message ----- 
> From: "Melvin C. Etheridge" <mele at enia.net>
> To: "Cisco-Nsp" <cisco-nsp at puck.nether.net>
> Sent: Wednesday, May 26, 2004 8:52 AM
> Subject: [nsp] Help! AS5300 DialUp Problem
>
>
> > I have a AS5300 with 192 v.92 Mica Modems that I have just put into
> service
> > to replace several ascend boxes.
> >
> > The problem is that it hangs up on EVERYONE after 33 minutes!!!!
> >
> > Help!
> >
> > Here's a copy of my config.....
> >
> > Using 3667 out of 126968 bytes
> > !
> > version 12.3
> > service timestamps debug datetime msec
> > service timestamps log uptime
> > service password-encryption
> > service internal
> > service udp-small-servers
> > service tcp-small-servers
> > !
> > hostname Cisco5300.enia.net
> > !
> > no logging console
> > enable password 7 141101525854
> > !
> > username x.x.x.x
> > spe 1/0 1/9
> >  firmware location flash:mica-modem-pw.2.9.4.0.bin
> > !
> > !
> > resource-pool disable
> > !
> > aaa new-model
> > !
> > !
> > aaa authentication login dialin group radius
> > aaa authentication ppp default group radius
> > aaa authorization network default group radius
> > aaa accounting update newinfo
> > aaa accounting exec default start-stop group radius
> > aaa accounting network default start-stop group radius
> > aaa session-id common
> > ip subnet-zero
> > ip cef
> > !
> > async-bootp dns-server x.x.x.x x.x.x.x
> > modemcap entry
> > cisco:MSC=&F&D2S54=16584S0=0S29=12S21=15S62=8S63=3S34=18000S40=10
> > S10=50
> > modemcap entry noV92orV44:MSC=&F&D2S0=0S29=6S21=3S34=18000S40=10S10=50
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > no voice hpi capture buffer
> > no voice hpi capture destination
> > !
> > !
> > !
> > !
> > controller T1 0
> >  framing esf
> >  clock source line primary
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 1
> >  framing esf
> >  clock source line secondary 1
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 2
> >  framing esf
> >  clock source line secondary 2
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 3
> >  framing esf
> >  clock source line secondary 3
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 4
> >  framing esf
> >  clock source line secondary 4
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 5
> >  framing esf
> >  clock source line secondary 5
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 6
> >  framing esf
> >  clock source line secondary 6
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > controller T1 7
> >  framing esf
> >  clock source line secondary 7
> >  linecode b8zs
> >  ds0-group 1 timeslots 1-24 type e&m-fgb
> > !
> > !
> > interface Loopback1
> >  no ip address
> > !
> > interface Ethernet0
> >  no ip address
> >  shutdown
> > !
> > interface Serial0
> >  no ip address
> >  shutdown
> >  clockrate 2015232
> >  no fair-queue
> > !
> > interface Serial1
> >  no ip address
> >  shutdown
> >  clockrate 2015232
> >  no fair-queue
> > !
> > interface Serial2
> >  no ip address
> >  shutdown
> >  clockrate 2015232
> >  no fair-queue
> > !
> > interface Serial3
> >  no ip address
> >  shutdown
> >  clockrate 2015232
> >  no fair-queue
> > !
> > interface FastEthernet0
> >  ip address x.x.x.x 255.255.254.0
> >  no ip mroute-cache
> >  duplex auto
> >  speed auto
> > !
> > interface Group-Async1
> >  ip unnumbered FastEthernet0
> >  encapsulation ppp
> >  no ip mroute-cache
> >  dialer in-band
> >  async mode interactive
> >  peer default ip address pool dialup
> >  ppp authentication pap
> >  group-range 1 120
> > !
> > interface Dialer1
> >  ip unnumbered FastEthernet0
> >  encapsulation ppp
> >  no ip mroute-cache
> >  dialer in-band
> >  peer default ip address pool dialup
> >  ppp authentication pap
> > !
> > ip local pool dialup x.x.x.x 6x.x.x.x
> > ip default-gateway x.x.x.x
> > no ip classless
> > ip route 0.0.0.0 0.0.0.0 x.x.x.x
> > no ip http server
> > !
> > !
> > dialer-list 1 protocol ip permit
> > !
> > snmp-server community
> > snmp-server location
> > snmp-server contact
> > snmp-server enable traps tty
> > !
> > radius-server host x.x.x.x auth-port 1645 acct-port 1646
> > radius-server timeout 15
> > radius-server key
> > radius-server authorization permit missing Service-Type
> > radius-server authorization default Framed-Protocol ppp
> > !
> > !
> > !
> > !
> > line con 0
> > line 1 120
> >  no flush-at-activation
> >  modem Dialin
> >  modem autoconfigure type noV92orV44
> >  transport input all
> >  autoselect ppp
> > line aux 0
> > line vty 0 4
> >  login authentication local
> > !
> > !
> > end
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>