[nsp] NPE-225 boot code not loading on 7206 NON-VXR

[Yuval Ben-Ari]

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Chris Hale
> Sent: Thursday, May 27, 2004 18:09
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] NPE-225 boot code not loading on 7206 NON-VXR
> 
> 
> I noticed the boot code on a NPE-225 w/ IO-2FE won't load, 
> and we have to
> use rommon to load the router every time.  Is there a free 
> upgrade to get
> this old version of the NPE-225 swapped out to a newer 
> firmware version?

do you happen to use ATA flash disk?
if so, you might be running into CSCdw52832 described here:
<http://www.cisco.com/en/US/partner/products/hw/routers/ps341/products_f
ield_notice09186a0080094cbd.shtml>
the easy workaround is to set the "boot system" command (recommended
anyway)

Yuval