[c-nsp] VoIP GW kits

[Brian Turnbow]

The 1760 holds 4 vic bri cards that have 2 ports each.
 

-----Original Message-----
From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
Sent: martedì 2 novembre 2004 12.56
To: Brian Turnbow; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] VoIP GW kits

What 1700 do I exactly need, with which cards?

I am anxious to hear how you can fit 8 BRI ports on a small box like a 1700...?

Vincent


> -----Original Message-----
> From: Brian Turnbow [mailto:b.turnbow at twt.it]
> Sent: mardi 2 novembre 2004 12:53
> To: Vincent De Keyzer; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] VoIP GW kits
> 
> The 1700 series will do all you request. 
> The 2621 will do the pri just fine but has limits on bri ports Regards 
> Brian
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Vincent De 
> Keyzer
> Sent: martedì 2 novembre 2004 12.18
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] VoIP GW kits
> 
> Hello people,
>  
> what are the smallest possible Cisco kits to create the following VoIP 
> gateways configurations:
> 
> 	
> *	4-BRI + 1 or 2 ethernet ports? 
> 
> *	8-BRI + 1 or 2 ethernet ports? 
> 
> *	1-PRI + 1 or 2 ethernet ports?
> 
> It would be nice to do it on 2621 (XM or not), that are somewhat 
> standard in my organisation.
>  
> Thanks
>  
> Vincent
>  
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>