[c-nsp] 2948G-L3 + VLAN + Access-list

[Isamar Maia]

Ok. Thanks for you reply.
Anyway, the GIG-E ports are setup as trunk lines interconnecting the
switch A with B and C. Can I use the access-list on it?

Isamar


On Tue, 2 Nov 2004, Gert Doering wrote:

> Hi,
>
> On Tue, Nov 02, 2004 at 09:16:38PM +0900, Isamar Maia wrote:
> > I have 3 2948G-L3 connected using trunks and configured
> > with 8 VLANs.
> > I am trying to use access-list but I have tried several ways
> > but it doesn't work.
>
> If I remember correctly, the 2948G-L3 can only apply access-lists to
> the GigE ports (and even then, only if they do not exceed a given
> length - if they do, they will be *silently*!! disabled).
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>                                                            //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
>