[c-nsp] Cat 3550 and 3750: Policing on the basis of VLAN id

[Dmitri Kalintsev]

Hi Steinar,

Is the box you're trying it on a 3750-metro or not?

P.S. I have my own gripes with 3550, whereas I cannot seem to simultaneously
"trust dscp" and "set cos" inside the same policy map \ class (where the
class-map in question is matching on vlan).. :(((

On Thu, Nov 04, 2004 at 11:00:11PM +0100, sthaug at nethelp.no wrote:
> On the Cisco 3550, it is possible to classify packets (with a class-map)
> based on VLAN id (eg. "match vlan 1234"). This makes it possible to
> police individual VLANs within a VLAN trunk, based only on VLAN id.
> 
> On the Cisco 3750, there is no "match vlan" command (not in the CLI if
> you use the question mark, not in the documentation). Thus it would seem
> that the 3750 *cannot* police individual VLANs within a VLAN trunk,
> based only on VLAN id.
> 
> Am I missing something here, or is this the way it's supposed to be?
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
---end quoted text---

Regards,
-- 
D.K.