[c-nsp] Cat 6509 basic monitoring via SNMP

[atanas yankov]

In  netflow MIB's  you can see only trafic send to CPU(SUP2) depend on 
your configuration  , you never see traffic going through ASICs  :)) 
this traffic will be switched in hardware .

br,
Atanas Yankov

Sam Munzani wrote:

> Hi,
>
> Can somebody advise following monitoring on 6509 via SNMP? I am 
> running sup2/msfc2 with 12.2.17d.SXB4 in native mode. As per CCO the 
> NetFlow MIB is supported but snmpwalk doesn't show anything.
>
> I have configured following on the box.
> int vlan 1
> ip route-cache flow
> int vlan 2
> ip route-cache flow
>
> CEF is enabled globally.
> Following doesn't produce anything.
> nms # snmpwalk 10.10.1.1 public .1.3.6.1.4.1.9.9.387
>
> I would also like to know OID for backplane utilization if anybody 
> know already.
>
> Thanks,
> Sam
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>