[c-nsp] routed via RIB, Cisco 3640 VoIP Problem

[Saad]

I am running VoIP call termination on Cisco 3640 with NM-HDV module. The

problem I am facing is that whenever I have traffic load then I have a
lot of outgoing traffic on the router. I am using WIC-1ADSL card for
internet and the protocol used is RFC1483 Routed. From previous
discussion I think it might be the UDP packet size or I doubt that it
might be a routing loop. When I use debug ip packet detail, I get the
following result.


23:45:17: IP: tableid=0, s=80.32.170.82 (local), d=213.228.199.50
(ATM2/0.1), routed via RIB
23:45:17: IP: s=80.32.170.82 (local), d=213.228.199.50 (ATM2/0.1), len
56, sending
23:45:17:     ICMP type=3, code=3
23:45:17: IP: tableid=0, s=213.228.199.50 (ATM2/0.1), d=80.32.170.82
(ATM2/0.1), routed via RIB
23:45:17: IP: s=213.228.199.50 (ATM2/0.1), d=80.32.170.82 (ATM2/0.1),
len 41, rcvd 3
23:45:17:     UDP src=17846, dst=17834
23:45:17: IP: tableid=0, s=213.228.199.50 (ATM2/0.1), d=80.32.170.82
(ATM2/0.1), routed via RIB
23:45:17: IP: s=213.228.199.50 (ATM2/0.1), d=80.32.170.82 (ATM2/0.1),
len 144, rcvd 3
23:45:17:     UDP src=16821, dst=18515
23:45:17: IP: tableid=0, s=213.228.199.50 (ATM2/0.1), d=80.32.170.82
(ATM2/0.1), routed via RIB
23:45:17: IP: s=213.228.199.50 (ATM2/0.1), d=80.32.170.82 (ATM2/0.1),
len 120, rcvd 3
23:45:17:     UDP src=17281, dst=18265