[c-nsp] Low End Router - 3 interfaces

[Temkin, David]

2801 with an ethernet WIC will set you back under $2k.

 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Thursday, November 11, 2004 6:15 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Low End Router - 3 interfaces
> 
> Hi there...
> 
> We are looking for a low end Cisco router that supports three 
> interfaces.  These are for 4 Meg LAN extension circuits over 
> ADSL (non-PPPOE).  
> 
> I'm thinking about the idea of using 1711 routers but 
> wondering if this will work properly... Or is there a way to 
> get 3 ports jammed into a 2600 series?
> 
> What we do is run OSPF on two interfaces facing our end and 
> use one interface to connect to the customer's LAN.
> 
> Thanks for any input,
> 
> Paul
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments.  Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited.  Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument.  Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.