[c-nsp] Cisco 4507R

[Tantsura, Jeff]

See attachment

I used 4506's for access aggregation with CAR and OSPF, worked just fine

Jeff

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Dave Breiland
Sent: Tuesday, November 09, 2004 10:23 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco 4507R

I am looking at purchasing a Cisco 4507R with dual redundant SupIV.
However I want to make sure I am buying what I want/need!  I basically
am looking to get a scaled down version of a 6509 with a SUP2 & MSFC.
Will the 4500 SUP IV card allow the same functionality as the MSFC?

Aside from backplane speed, what is the lowest SUP module I can get on a
4500 that would provide full routing like the MSFC?

Does anyone on the list use a 4500 for this purpose?

Thanks,
Dave
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient,  you are not authorized to read, print, retain, copy, disseminate,  distribute, or use this message or any part thereof. If you receive this  message in error, please notify the sender immediately and delete all  copies of this message.