[c-nsp] Router audit

[Sergio Ramos]

Hi,

You can use TACACS accounting to log all commands typed in a router.
You will get the timestamp, which user ran the command, from which IP
address and the command itself.

You can find more information in this previous thread:

http://puck.nether.net/pipermail/cisco-nsp/2004-August/012308.html

Sergio.


-----Original Message-----
From: Jean-Christophe Varaillon [mailto:jcvaraillon at dolnet.gr]
Sent: 11 November 2004 11:15
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Router audit


Hello,
 
I would like to know if it exists an auditing tool that would track any
change in the running configuration
(cisco router and/or pix), as they occur.
 
The idea is to get any mis-configuration that would disrupt network
services, even though
this mis-configuration command(s) would have been removed 5 min
afterward.
 
Thank you.
 
Christophe
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/