[c-nsp] Low End Router - 3 interfaces

[Richard Danielli]

If you have switch kicking around that can do vlans, it may be cheaper 
then then a buying a couple of WICS.

Just adding a bit of out of the box thinking

-rd-


Paul Stewart wrote:
> Hi there...
> 
> We are looking for a low end Cisco router that supports three
> interfaces.  These are for 4 Meg LAN extension circuits over ADSL
> (non-PPPOE).  
> 
> I'm thinking about the idea of using 1711 routers but wondering if this
> will work properly... Or is there a way to get 3 ports jammed into a
> 2600 series?
> 
> What we do is run OSPF on two interfaces facing our end and use one
> interface to connect to the customer's LAN.
> 
> Thanks for any input,
> 
> Paul
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Richard Danielli
President, eSubnet

(416) 203-5253
www.eSubnet.com