[c-nsp] Cisco Layer 3 Switch Recommendation

[Jim McBurnett]

Good point..normally to go from Token ring to Ethernet...
OR PPP to Ethernet, etc
You use a router.. Not a switch..

OR in the really old days you used a Bridge...........

J 

-----Original Message-----
From: Richard Danielli [mailto:richard.danielli at esubnet.com] 
Sent: Saturday, November 13, 2004 3:21 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cisco Layer 3 Switch Recommendation



I thought that routers can change frame types while switches didn't.

simple enough ?

-rd-

Pete Templin wrote:
> Jim McBurnett wrote:
> 
>> Ok...
>> I am gonna go out on a Limb here....
>> How about a Router that can do switching..
> 
> 
> A Cisco 2501 Router can be configured to do Frame Relay switching.  I 
> think we've all considered the 2501 to be a router since day one...
> 
> pt
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

--
Richard Danielli
President, eSubnet

www.eSubnet.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/