[c-nsp] Vs.: Large Scale dial-out

[Arne Larsen]

Hi Folks.

 

Is there someone that can help me out here? I'm having trouble with Large Scale Dial-out on a 3640cisco router. 

I have installed a NM-card with 8 BRI-interfaces on the router.

I'm downloading the static routes to the router via Radius, and using DNS-Dialing for looking up the phone number off the costumers.

At the costumers premises there is an analog-modem device that is looking on the DMTF-tones that arrives on the PSTN-line, if the right calling number arrives the modem takes the call. There can be more than one device on each line, and it is here that I have to be able to control, which interface that the router selects when it is making an outgoing call.

But what ever I try, I end up with that the router rotates on all ISDN-interfaces.

I have tried to user the Dialer-pool and Dialer pool-member parameters, but that seem to disable the DNS-dialing feature.

 

 

Regards 

Arne Larsen TDC. Denmark

 


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.797 / Virus Database: 541 - Release Date: 15-11-2004