[c-nsp] Turning PVCs into VLANs

[Vincent De Keyzer]

Can I do it with a 7206VXR + PA-A3-OC3MM?

Vincent


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of McCallum, Robert
> Sent: vendredi 19 novembre 2004 15:05
> To: 'Vincent De Keyzer'; 'cisco-nsp'
> Subject: RE: [c-nsp] Turning PVCs into VLANs
> 
> its called bridging
> 
> 
> 
> 
> > -----Original Message-----
> > From: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
> > Sent: 19 November 2004 14:01
> > To: 'cisco-nsp'
> > Subject: [c-nsp] Turning PVCs into VLANs
> >
> >
> > Hello,
> >
> >
> >
> > I would like some Cisco box to perform the following :
> >
> > *	it should have one ATM interface and a FastEthernet interface
> > *	Ethernet frames should be bridged between the PVCs
> > terminating on
> > the ATM interface, and the VLANs of the .1Q trunk on the
> > FastEthernet interface
> >
> >
> >
> > (I'm not sure I am using the right words here)
> >
> >
> >
> > Is it possible? With what box? In the Cisco terminology, how
> > is this feature called?
> >
> >
> >
> > V
> >
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco> -nsp
> > archive at
> > http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/