[c-nsp] Turning PVCs into VLANs

[Vincent De Keyzer]

2900 is cool - I have those :)

Which 2900 do you need exactly (hopefully 2924XL)? What is the product code
of the ATM edge card? Couldn't find it on the CCO pricing tool...

Vincent


> -----Original Message-----
> From: Dan Armstrong [mailto:dan at beanfield.com]
> Sent: vendredi 19 novembre 2004 17:37
> To: Vincent De Keyzer; 'Nicolaj Ottsen'; 'cisco-nsp'
> Subject: Re: [c-nsp] Turning PVCs into VLANs
> 
> A 7200 is a router, not a switch.  It does that with IRB.  Not a
> recommended
> configuration... it can be "done" but a 5505/6500/2900 with an ATM edge
> card
> is the way to go.
> :-)
> 
> 
> Dna.
> 
> 
> On Friday 19 November 2004 11:29, Vincent De Keyzer wrote:
> > Interesting info... what is a way to go higher than 300 MAC addresses?
> >
> > > -----Original Message-----
> > > From: Nicolaj Ottsen [mailto:no at webpartner.dk]
> > > Sent: vendredi 19 novembre 2004 17:24
> > > To: Vincent De Keyzer; cisco-nsp
> > > Subject: RE: [c-nsp] Turning PVCs into VLANs
> > >
> > > Yes, but I only scales to 300 Mac addresses, so in practical terms no
> :(
> > >
> > > > -----Original Message-----
> > > > From: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
> > > > Sent: 19. november 2004 15:16
> > > > To: 'cisco-nsp'
> > > > Subject: RE: [c-nsp] Turning PVCs into VLANs
> > > >
> > > > Can I do it with a 7206VXR + PA-A3-OC3MM?
> > > >
> > > > Vincent
> > > >
> > > > > -----Original Message-----
> > > > > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > > > > bounces at puck.nether.net] On Behalf Of McCallum, Robert
> > > > > Sent: vendredi 19 novembre 2004 15:05
> > > > > To: 'Vincent De Keyzer'; 'cisco-nsp'
> > > > > Subject: RE: [c-nsp] Turning PVCs into VLANs
> > > > >
> > > > > its called bridging
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Vincent De Keyzer [mailto:vincent at dekeyzer.net]
> > > > > > Sent: 19 November 2004 14:01
> > > > > > To: 'cisco-nsp'
> > > > > > Subject: [c-nsp] Turning PVCs into VLANs
> > > > > >
> > > > > >
> > > > > > Hello,
> > > > > >
> > > > > >
> > > > > >
> > > > > > I would like some Cisco box to perform the following :
> > > > > >
> > > > > > *	it should have one ATM interface and a FastEthernet
> >
> > interface
> >
> > > > > > *	Ethernet frames should be bridged between the PVCs
> > > > > > terminating on
> > > > > > the ATM interface, and the VLANs of the .1Q trunk on the
> > > > > > FastEthernet interface
> > > > > >
> > > > > >
> > > > > >
> > > > > > (I'm not sure I am using the right words here)
> > > > > >
> > > > > >
> > > > > >
> > > > > > Is it possible? With what box? In the Cisco terminology,
> > > >
> > > > how is this
> > > >
> > > > > > feature called?
> > > > > >
> > > > > >
> > > > > >
> > > > > > V
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > > > > https://puck.nether.net/mailman/listinfo/cisco> -nsp archive at
> > > > > > http://puck.nether.net/pipermail/cisco-nsp/
> > > > >
> > > > > _______________________________________________
> > > > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > > >
> > > > _______________________________________________
> > > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/