[c-nsp] IOS based switch command

[Josh Duffek]

THIRD_PARTY#sh mac-address-table ?
  address       address keyword
  aging-time    aging-time keyword
  count         count keyword
  dynamic       dynamic entry type
  interface     interface keyword
  limit         display status for Mac limit Feature
  module        display entries in DFCcard
  multicast     multicast info for selected wildcard 
  notification  Display status for Notification Features
  static        static entry type
  vlan          vlan keyword
  |             Output modifiers
  <cr>

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Kevin Madl
> Sent: Friday, November 19, 2004 4:18 PM
> To: cisco-nsp
> Subject: [c-nsp] IOS based switch command
> 
> Does anyone know of an IOS based command on a switch that is similar
to
> the set based command - show cam dynamic?
> 
> Kevin
> 
> 
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.4.1 - Release Date: 11/19/2004
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/