[c-nsp] OSPF sham links

Rodney Dunn rodunn at cisco.com
Mon Nov 29 09:58:41 EST 2004


OSPF sham links are a control plane function that don't 
have anything to do with the underlying hardware
architecture.

You were probably looking at a BU special set of Release-notes
and they inherited the feature functionaliy from the parent
branch of code they sync'd from.

Rodney

On Mon, Nov 29, 2004 at 09:33:09AM -0000, Nic McCartney wrote:
> Guys, 
> 
> I have been trying to set up an ospf sham link across an MPLS network
> with ESR10k's. Now the CCO feature navigator specifically mentioned
> 10K's with PRE-2 would support the sham link. Can anybody confirm this
> for me please? (I have PRE's but the device allowed me to apply the 
> config with the correct IOS loaded).
> 
> Thanks, 
> 
> Nic
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list