[c-nsp] How to access cisco remotely when cpu 100%

[Jay Hennigan]

On Sat, 2 Oct 2004, Prit Patel wrote:

> Hello All,
>
> How can i access my cisco box remotely via telnet when CPU reached
> 100% for that box.

Very slowly, patiently, and painfully.

If it is responding at all, turning on service nagle may help.

If there is another box at the remote site that is responding, a
rollover cable between the aux port of box A to the console of box B
with reverse telnet can be a lifesaver.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/