[c-nsp] PIX IP Aliasing
rey.martin at qalacom.com
Fri Oct 8 16:44:55 EDT 2004
just a quick question, is there any way to translate another protocol
it seems that the 'static' command only support tcp and udp translation.
----- Original Message -----
From: <rwcrowe at comcast.net>
To: "Paul Stewart" <pauls at nexicom.net>; <cisco-nsp at puck.nether.net>
Sent: Wednesday, October 06, 2004 12:37 AM
Subject: Re: [c-nsp] PIX IP Aliasing
> Unless I'm unclear on your requirements, you don't really need a secondary
> interface, just a free public IP address from your external pool.
> To translate tcp port 80:
> static (inside,outside) tcp x.x.x.x 80 y.y.y.y 80
> To translate udp port 53:
> static (inside,outside) udp x.x.x.x 53 y.y.y.y 53
> You can translate either tcp or udp and any port.
> Where x.x.x.x is a free public IP address and y.y.y.y is the IP address of
> the internal host.
> Rob Crowe
> rwcrowe at comcast.net
>> We have a 515E PIX... I'm trying to add a secondary interface to the
>> Outside. This is so I can setup port translations to map to an internal
>> box (two ports).
>> I've done this using the interface IP before and it worked but I'd like
>> this to be done a secondary IP on the same interface.. can this be done?
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp